Configure your custom exhaust bend
Because tube material, diameter, wall thickness bend angle and centre line radius vary it is difficult to stock bends to suit all needs. We have a large range of tooling that enables us to bend thousands of combinations. We have created a database of bend options that you can search below by selecting your criteria starting with the material you’d prefer. If you can’t see what you need you might try another material or drop us an email as we may be able to create what you need in a different way.
Enter your requirements from the easy to use drop down menus and free format boxes. Once you have specified the quantity of bends simply click on ‘send request’ in the box on the right and fill out your details. This will generate a message to us.
As soon as we have calculated a price we will reply in an email and supply a link to where you can order and pay for the bends if you wish to place an order. We will also quote for and organise delivery anywhere in the world.
Step 1. |
Select the material for the bend |
|
Step 2. |
Pick a tube diameter to reveal the CLRs available |
|
| CLR |
Angle ° |
Wall thickness* |
Clamp length |
Tail length** |
Qty |
|
* Wall thickness is always measured in milimeters.
** If you require additional tail length or have any other specific requirement, please add a note in the 'additional instructions' section before you send the request.
The following diagram describes the various parameters required to design your custom exhaust bend.
