casestudy-F2.jpgStainless + Inconel system for Formula 2

The development of the William F1-designed Formula 2 car for Jonathan Palmer's MotorSport Vision illustrates the way that Good Fabrications can work with customers to help and exhaust system evolve.

We needed to produce 25 systems in a very short time frame as the final design was still being refined within weeks of the first race.  Faced with a turbo-charged 4 cylinder engine the exhaust system had to withstand incredibly high levels of heat a team approach involving Williams, MotorSport Vision and Good Fabrications co-designed and fabricated a system using a combination of stainless steel and inconel to fit both the car and the budget.

casestudy-ducatiDucati 1098 R/S Inconel Exhaust System

A US Custom Bike shop asked us to design an inconel exhaust system that would fit a Ducati 1098 and 1198 S and R. Based on an order of 15 systems we looked at the existing system on a Ducati 1098 redesigned the primaries to improve both the look and the gas flow.  By using a combination of inconel pressings and bends we smoothed out the contours and reduced the amount of welding required.