V-BAND CLAMPS

V-Band Clamps

Our V-Band Clamps consist of multiple profiled segments spotwelded to an outer strap and can withstand up to 1,100°C (gas temperature). 

 

  • Male/female V Band Rings/flanges are machined in house to suit tube diameters from 2" (50.8mm) to 3 1/2" (88.9mm) to our own design offering a gas tight seal with easy dismantling.

  • We can provide these clamp rings in Stainless Steel, Inconel 625 and Titanium

  • We supply high quality V Band Clamps in Stainless Steel 316 with self locking nuts.

  • We sell male and female V Band rings as sets to enable easy connection and separation of exhaust sections using V Band clamps.

This type of clamping system always requires less working space and can provide a reduction in overall weight when this is compared to the traditional bolted flange systems.

 

In addition, the use of V-Band Clamps reduces the time it takes to assemble a system in initial building programs and during service or maintenance during a racing event or dynotest.

The GoodFabs V-band Clamps are engineered to index perfectly onto the tube. The assembly of the male and female clamps are made easier because of the bespoke engagement feature on both rings. This allows for a perfect alignment to ensure the gas dynamics are not disturbed throughout the connection.

The table below shows how the male and female V Band ring part no.s match with the pipe/tube outer diameters and the corresponding V Band Clamp part no.

      Tube OD        

50.8mm (2in)

57.2mm (2.25in)

60.3mm (2.38in)

63.5mm (2.5in)

69.9mm (2.75in)

76.2mm (3in)

88mm (3.5in)

    V-Band Ring    

VBCR-50-M or F

VBCR-57-M or F

VBCR-60-M or F

VBCR-63-M or F

VBCR-69-M or F

VBCR-76-M or F

VBCR-88-M or F

  V-Band Clamp  

VBCR-64-C

VBCR-76-C

VBCR-76-C

VBCR-76-C

VBCR-83-C

VBCR-89-C

VBCR-101-C

All rings can be provided in Male (M) or Female (F) although we suggest to purchase these per set unless the mating ring was also purchased from ourselves in the past.

GoodFabs-Vband-clamps-stainless-inconel
GoodFabs-Vband-clamps-stainless-inconel

Inconel V-Band rings with clamp for the most robust connections.

GoodFabs-Vband-clamps-stainless-inconel
GoodFabs-Vband-clamps-stainless-inconel

GoodFabs machines their V-band rings In-House in stainless steel, titanium and Inconel

GoodFabs-Vband-clamps-stainless-inconel
GoodFabs-Vband-clamps-stainless-inconel

Machined V-Band rings to the highest standards

GoodFabs-Vband-clamps-stainless-inconel
GoodFabs-Vband-clamps-stainless-inconel

Machined V-Band rings in male of female form.

GoodFabs-Vband-clamps-stainless-inconel
GoodFabs-Vband-clamps-stainless-inconel

Machined V-Band rings fit perfectly for the optimal exhaust flow and fitment

GoodFabs-V-Band-Rings
GoodFabs-V-Band-Rings

V-Band rings machined to the tightest tolerances for a perfect fit every time.

Goodfabs-Lambda-Boss
Goodfabs-Lambda-Boss

GoodFabs Lambda Bosses come threaded to suit every lambda sensor!

GoodFabs-Lambda-Thermo-bosses (6)
GoodFabs-Lambda-Thermo-bosses (6)

Goodfabs Lambda Boss cast from the best materials such as Inconel and Stainless Steel

Contact us for further information on our supply V-Band rings and Clamps

Thank you for contacting us. We'll get back to you as soon as possible.